TM 5-3805-261-34
TRANSMISSION MAINTENANCE.
5-5.
Control Cables. (Sheet 5 of 8)
REMOVAL
29. Loosen three nuts (49, Figure
5-26).
30. Remove three rod ends (48) and
nuts (49).
31. Remove and discard three seals
(50) and six rings (51) from
three couplings (45, Figure
5-27).
32. Remove retainer (52) and three
preformed packings (53) from
cables (54, 55 and 56). Discard
three preformed packings (53).
33. Remove cables (54, 55 and 56)
from vehicle.
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter
2.
INSTALLATION
1.
Position cables (56, 55 and 54,
Figure 5-27) on vehicle.
2.
Install three new preformed
packings (53) on cables (56, 55
and 54) at transmission under
left side of engine compartment.
3.
Install retainer (52), six new
rings (51) and three new seals
(50) on couplings (45).
4.
Install three nuts (49) and rod
ends (48, Figure 5-26).
Go to Sheet 6
5-21
Figure 5-27.
Figure 5-26.
