TM 5-3805-261-34
MONITORING SYSTEM MAINTENANCE. (cont)
4-14.
Electrical Monitoring System Panel. (Sheet 2 of 3)
DISASSEMBLY
1.
Remove plug (1) and preformed
packing (2) from cover (4).
Discard preformed packing (2,
Figure 4-83).
2.
Remove four stud bolts (3), cover
(4) and preformed packing (5).
Discard preformed packing (5).
3.
Remove nut (6) from harness
assembly (12).
4.
Remove nine screws (7), lock-
washers (8), board assembly (9)
and housing (10, Figure 4-84).
5.
Remove washer (11) from harness
assembly (12).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
ASSEMBLY
1.
Install washer (11) on harness
assembly (12, Figure 4-84).
Figure 4-84.
Go to Sheet 3
4-78
Figure 4-83.
