TM 5-3805-261-34
CHARGING SYSTEM MAINTENANCE.
4-4.
Alternator (Delco). (Sheet 7 of 18)
DISASSEMBLY
30. Using a suitable press, remove rotor (57, Figure
4-8).
31. Remove collar (58).
CAUTION
Removal of race from rotor will cause destruction.
Remove
race
only
if
inspection
indicates
replacement is necessary.
32. Inspect race (59). Replace if cracked, broken,
distorted, grooved or scored.
33. Using suitable puller, remove race (59), if
necessary.
34. Remove four screws (60), washers (61), retainer
(62), seal (63), gasket (64), collar (65), bearing
(66) and seal (67) from frame (68, Figure 4-9).
Discard seals (63 and 67) and gasket (64).
Remove all gasket material from mounting
surfaces.
Figure 4-8.
Figure 4-9.
Go to Sheet 8
4-11
