TM 5-3805-261-34
CHARGING SYSTEM MAINTENANCE.
4-4.
Alternator (Delco). (Sheet 3 of 18)
DISASSEMBLY
1.
Remove fan (1) and slinger (2, Figure 4-1).
2.
Position items 3 thru 80 as an assembly in soft
jawed vise.
NOTE
Using scriber, matchmark frame and housing.
3.
Remove four screws (3), lockwashers (4) and
plate (5).
4.
Remove three screws (6), lockwashers (7), four
screws (8), lockwashers (9), cover (10) and
gasket (11). Discard gasket (11). Remove all
gasket material from mounting surfaces.
5.
Remove cap (12), nut (13), washer (14), nut
(15), insulator (16), stud (17) and bushing (18,
Figure 4-2).
6.
Remove grommet (19).
7.
Remove screw (20), washers (21 and 22) and
insulator (23).
8.
Remove three nuts (24).
Figure 4-1.
Figure 4-2.
Go to Sheet 4
4-7
