TM 5-3805-261-34
ENGINE MAINTENANCE.
3-19.
Exhaust Manifold. (Sheet 2 of 3)
REMOVAL
1.
Remove two bolts (1), washers (2) and shield
(3, Figure 3-79) from top, right side of engine.
2.
Remove four nuts (4), washers (5), two
brackets (6) and four washers (7).
3.
Remove four nuts (8), washer (9) and three
washers (10).
4.
Remove manifold (11) and four gaskets (12,
Figure 3-80). Discard four gaskets (12).
Remove all gasket material from mounting
surfaces.
CAUTION
Remove studs only if inspection
proves replacement is necessary.
5.
Remove stud (13), four studs (14)
and three studs (15) on right
side of cylinder head, if
necessary. Replace if cracked,
broken, heat damaged or threads
damaged.
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter
2.
Go to Sheet 3
3-105
Figure 3-79.
Figure 3-80.
