TM 5-3805-261-34
ENGINE MAINTENANCE. (cont)
3-20.
Tachometer Drive. (Sheet 2 of 3)
REMOVAL
1.
Remove bolt (I)lockwasher (2) and clamp (3,
Figure 3-81) from rear fuel injection pump,
right side of engine.
2.
Remove items 4 thru 7 as an assembly from
fuel injection pump rear governor housing.
3.
Remove and discard preformed packing (4,
Figure 3-82).
4.
Remove adapter (5) from adapter (7).
5.
Remove two caps (6).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter
2.
INSTALLATION
1.
Install two caps (6) on adapter (5, Figure 3-
82).
2.
Install adapter (5) on adapter (7).
3.
Install new preformed packing (4)on groove of
adapter (7). Lubricate outer diameter with
clean oil.
Figure 3-81.
Go to Sheet 3 Figure 3-82.
3-108
