ENGINE MAINTENANCE. (cont) - TM-5-3805-261-34

ENGINE MAINTENANCE. (cont) - TM-5-3805-261-34_173

ENGINE MAINTENANCE. (cont) - TM-5-3805-261-34_175

TM-5-3805-261-34 Grader Heavy Road Motorized (Caterpillar Model 130 G) Manual
Page Navigation
129

TM 5-3805-261-34 ENGINE MAINTENANCE. (cont) 3-18. Oil Filter Base. (Sheet 3 of 4) REMOVAL (cont) 8. Remove two bolts (29), washers (30), bracket (31) and two spacers (32, Figure 3-78) from oil filter base. 9. Remove cover (33), gasket (34),spring (35) and plunger (36). Discard gasket (34). Remove all gasket material from mounting surfaces. 10. Remove two bolts (37), washers (38), cover (39), gasket (40), spring (41) and plunger (42). Discard gasket (40). Remove all gasket material from mounting surfaces. CLEANING Clean all parts. Refer to Chapter 2. INSPECTION Inspect all parts. Refer to Chapter 2. INSTALLATION 1. Install plunger (42), spring (41), new gasket (40), cover (39), two washers (38) and bolts (37, Figure 3-78) to oil filter base. 2. Install plunger (36), spring (35), new gasket (34) and cover (33). 3. Install two spacers (32), bracket (31), two washers (30) and bolts (29). Go to Sheet 4 3-102 Figure 3-78.

Privacy Statement
Press Release
Contact