TM 5-3805-261-34
ENGINE MAINTENANCE.
3-18.
Oil Filter Base. (Sheet 2 of 4)
REMOVAL
1.
Remove two plugs (1) from top of oil filter
base.
2.
Remove bolts (2 and 3), washer (4), clip (5),
spacer (6), tube (7), gasket (8) and preformed
packing (9, Figure 3-76) from left side of
engine. Discard gasket (8) and preformed
packing (9). Remove all gasket material from
mounting surfaces.
NOTE
All hose and tube assemblies must be
tagged before disconnecting to aid in
installation. Cap all hose and tube
ends to prevent contamination.
3.
Remove bolts (10 and 11), washer (12), clip
(13), tube (14), gasket (15) and preformed
packing (16). Discard gasket (15) and
preformed packing (16). Remove all gasket
material from mounting surfaces.
4.
Remove two bolts (17), washers (18) and
spacers (19, Figure 3-77).
5.
Remove bolt (20), washer (21), bolt (22),
washer (23), bolt (24), washer (25), bolt (26)
and washer (27).
6.
Remove items 28 thru 42 as an assembly.
7.
Remove and discard preformed packings (43
and 44).
Go to Sheet 3
3-101
Figure 3-76.
Figure 3-77.