TM 5-3805-261-34
HYDRAULIC SYSTEM MAINTENANCE.
17-2.
Centershift Cylinder. (Sheet 3 of 4)
DISASSEMBLY
8.
Remove crown (13) from rod
assembly (14, Figure 17-6).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
ASSEMBLY
1.
Position crown (13) on rod
assembly (14, Figure 17-6).
2.
Using clean oil, lubricate new
seals (12 thru 10), new preformed
packing (9) and ring (8, Figure
17-5).
3.
Using seal installer, install new
seals (12 thru 10) in head (7).
Lip of seal (11) is toward inside
of head (7). Lip of seal (10) is
toward outside of head (7).
4.
Install items 12 thru 7 as an
assembly on rod assembly (14,
Figure 17-4).
5.
Using seal expander, install new
seal assembly (6) and ring (5) on
piston (4, Figure 17-3).
Go to Sheet 4
Figure 17-6.
17-5