TM 5-3805-261-34
FRAME MAINTENANCE.
16-3. Articulation Hitch Bearing. (Sheet 7 of 7)
INSTALLATION
17.
Install shim(s) (7, Figure
16-33). Number of shim(s) (7) is
determined by minimum measurement
taken in step 15.
18.
Position items 6 and 5 as an
assembly over bearing (8) on top
of lower pin bore of front frame.
19.
Install seven bolts (3) and
lockwashers (4). Tighten seven
bolts (3) to 75 ft-lb torque.
20.
Install spacer (2) on bearing (8).
21.
Install fitting (1).
22.
Remove floor jack.
23.
Using clean grease, lubricate
fitting (1). Refer to LO
5-3805-261-12.
NOTE
Return 130G Grader to
original equipment condition.
End of Task
Figure 16-33.
16-21/(16-22
