TM 5-3805-261-23-2
CIRCLE ASSEMBLY REPLACEMENT - CONTINUED
0344 00
REMOVAL - CONTINUED
NOTE
Tag and bundle shims to aid in installation.
6.
Remove 8 locknuts (20), washers (22), bolts (13),
13
12
washers (12), 4 bolts (19), washers (18), shoes (17),
14
24 shims (16), 28 shims (15), 8 strips (14), and 4 strips
(21) from drawbar assembly (2). Discard locknuts.
2
15
22
16
17
21
18
19
397-1697
20
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death to per-
sonnel.
NOTE
Circle weighs 1,050 lb (476 kg).
7.
Attach sling to circle (11).
SLING
23 (HIDDEN)
8.
Remove jack stands.
11
9.
Turn battery disconnect switch to the ON position and
10.
Move machine back to remove circle drive motor pin-
ion (23) from engagement in circle (11). Lift drawbar
assembly (2) away from circle.
11.
Stop engine.
2
12.
Lower circle (11) to ground.
13.
Remove circle (11) from under machine.
397-1698
JACK STANDS
14.
Remove sling.
0344 00-3