TM 5-3805-261-23-2
BLADE BRACKETS REPLACEMENT - CONTINUED
0343 00
REMOVAL - CONTINUED
12.
Remove bracket (16) from circle (23).
SLING
23
13.
Remove shaft (25) from pipe (24).
14.
Remove sling.
16
24
397-1693
25
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0020 00.
INSTALLATION
1.
Position shaft (25) in pipe (24) at bottom rear of circle (23).
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death to per-
sonnel.
NOTE
SLING
Bracket weighs 68 lb (31 kg).
2.
Attach sling to bracket (16).
16
3.
Install bracket (16) in circle (23).
4.
Install ten shims (17), cap (18), two washers (19),
bolts (20), washers (22), and bolts (21).
5.
Remove sling from bracket (16).
6.
Install bar (10). Align tapped holes in bar with holes in
17
bracket (16).
7.
Support bar (10) by tying both ends to frame with
18
rope.
22
19
8.
Install two washers (14) and bolts (13).
21
20
397-1692
9.
Install nuts (12 and 15).
0343 00-4
