TM 5-3805-261-23-2
DRAWBAR ASSEMBLY REPLACEMENT - CONTINUED
0342 00
REMOVAL
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death to per-
sonnel.
NOTE
Drawbar weighs 500 lb (227 kg).
1.
Attach sling to front of drawbar (1).
2.
Position jack stands under three corners of drawbar (1).
NOTE
This procedure covers replacement of the right drawbar assembly. Follow these instructions for the left
drawbar assembly.
3.
Use hydraulics to lower rear of drawbar (1) onto jack stands.
4.
Remove two bolts (8), washers (7), cap (6), two shims (5), inserts (3 and 4), and two shims (2) from rear corners of
drawbar (1).
SLING
1
2
3
4
5
6
JACK STANDS
7
397-1686
8
0342 00-2