TM 5-3805-261-23-2
SCARIFIER CYLINDER REPAIR - CONTINUED
0338 00
DISASSEMBLY - CONTINUED
9.
Remove and discard seals (15, 16, and 17), preformed
packing (12), and ring (13) from housing (14).
17
16
12
15
13
14
397-2011
10.
Remove cap (5) from rod (4).
4
5
397-2012
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0020 00.
ASSEMBLY
1.
Position cap (5) on rod (4).
2.
Apply thin coat of clean oil to new seals (17, 16, and 15), new ring (13), and new preformed packing (12).
3.
Use a seal installer to install new seals (17, 16, and 15) on housing (14). Lip on center seal (16) faces inside housing. Lip
on outside seal (15) faces outside housing.
4.
Install new preformed packing (12) and new ring (13) on housing (14).
0338 00-4
