TM 5-3805-261-23-2
SIDESHIFT CYLINDER REPAIR - CONTINUED
0337 00
ASSEMBLY - CONTINUED
9.
Apply thin coat of grease to outside of housing (10),
inside of cap (3), and inside of cylinder (1).
2
3
10
397-2004
10.
Install rod (2) assembly into cylinder (1).
1
2
3
397-2001
NOTE
Tighten cap with rod assembly fully extended. This will keep cylinder, piston, and housing in alignment.
11.
Install cap (3) on cylinder (1). Tighten cap to 450 lb-ft (610 Nm).
12.
Install sideshift cylinder (WP 0247 00).
0337 00-5/(-6 Blank)
