TM 5-3805-261-23-2
FRAME SEPARATION AND CONNECTION REPLACEMENT
(CCE AND TYPE I MACHINES) - CONTINUED
0324 00
CLEANING AND INSPECTION
Clean and inspect all parts in accordance WP 0020 00.
INSTALLATION
1.
Position forklift under rear frame and remove jack stands.
2.
Apply shop air supply line to elbow (58) on parking brake actuator (56) and release parking brake
3.
Move rear frame (59) into position on front frame (60) using forklift.
4.
Use forklift to lift or lower rear frame (59) and hydraulic jack to move frame from side to side. Align bottom pin bore of
rear frame with pin bore of front frame (60).
45
47
46
55
44
53
49
50
397-1946
397-1953
NOTE
Install plate to hold spacer in place.
5.
Install spacer (55), plate (53), six bolts (50), and new
lockwashers (49).
6.
Lower temperature of pin (44) and install plate (46),
two new lockwashers (47), and bolts (45).
0324 00-9