TM 5-3805-261-23-2
FRAME SEPARATION AND CONNECTION REPLACEMENT
(CCE AND TYPE I MACHINES) - CONTINUED
0324 00
INSTALLATION - CONTINUED
NOTE
Use two 5/8-11NC x 6 bolts to keep holes in bottom of pin in alignment with holes in plate.
9.
Install two 5/8-11NC x 6 bolts (60), through plate (53)
54
and into pin (54).
10.
Install pin (54) completely.
11.
Remove two 5/8-11NC x 6 bolts (60).
53
60
397-1955
12.
Install six bolts (50), lockwashers (49), and plate (53).
Discard lockwashers.
13.
Install four new lockwashers (52), bolts (51), and plate
53
(53). Tighten bolts to 100 lb-ft (136 Nm).
49
52
50
51
397-1956
0324 00-11