TM 5-3805-261-23-2
FRAME SEPARATION AND CONNECTION REPLACEMENT
(CCE AND TYPE I MACHINES) - CONTINUED
0324 00
INSTALLATION - CONTINUED
7.
Install four new lockwashers (41) and bolts (40).
40
Cross tighten four bolts to 75 lb-ft (102 Nm). Tighten
one of four bolts to 75 lb-ft (102 Nm). Tighten one of
41
four bolts in the upper right corner of plate (42), then
tighten the next of four bolts in the lower left corner.
Tighten two remaining of four bolts.
42
397-1944
8.
Position pin (54).
54
397-1954
0324 00-10