TM 5-3805-261-23-2
TANDEM DRIVE HOUSING ASSEMBLY MAINTENANCE - CONTINUED
0310 00
DISASSEMBLY
NOTE
Note and mark location of four longer studs to aid in installation.
1.
Remove 24 studs (6) from outside of tandem housing
5
(7).
2.
Remove 15 studs (5) from inside of tandem housing
(7).
6
7
6
397-4240
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0020 00.
ASSEMBLY
1.
Apply adhesive to 15 studs (5) on inside of tandem housing (7) and install.
2.
Apply adhesive to 24 studs (6) on outside of tandem housing (7) and install.
INSTALLATION
1.
Install new preformed packing (3).
2.
Use sling and ratchet assembly to position tandem drive housing assembly (4).
3.
Install 18 washers (2) and nuts (1). Tighten nuts to 175 to 195 lb-ft (237 to 264 Nm).
4.
Install air brake lines (WP 0161 00).
5.
Install right service brakes (WP 0313 00).
6.
Install rear wheels (WP 0167 00).
7.
Fill tandem drive housing (WP 0023 00).
END OF WORK PACKAGE
0310 00-3/(-4 Blank)
