TM 5-3805-261-23-2
TANDEM DRIVE HOUSING ASSEMBLY MAINTENANCE
THIS WORK PACKAGE COVERS
Removal, Disassembly, Cleaning and Inspection, Assembly, Installation
INITIAL SETUP
Maintenance Level
References
Direct Support
WP 0020 00
Tools and Special Tools
Equipment Conditions
Tool kit, general mechanic's (Item 89, WP 0348 00)
Machine parked on level ground (TM 5-3805-261-
Shop equipment, field maintenance (Item 74, WP
10)
0348 00)
Parking/emergency brake applied (TM 5-3805-261-
Ratchet assembly (Item 66, WP 0348 00)
10)
Sling (Item 78, WP 0348 00)
Implements lowered to ground (TM 5-3805-261-
Wrench, torque (Item 100, WP 0348 00)
10)
Lifting device, 1,500-lb capacity
Engine off (TM 5-3805-261-10)
Materials/Parts
Battery disconnect switch in OFF position (TM 5-
3805-261-10)
Adhesive (Item 4, WP 0349 00)
Rear wheels removed (WP 0167 00)
Rag, wiping (Item 35, WP 0349 00)
Packing, preformed
Right service brakes removed (WP 0313 00)
Air brake lines removed (WP 0161 00)
Personnel Required
Two
Tandem drive housing drained (WP 0023 00)
REMOVAL
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death to per-
sonnel.
NOTE
Tandem drive housing weighs 1,310 lb (594 kg).
This procedure covers maintenance of the right side tandem drive housing. Follow these instructions for
the left side tandem drive housing.