TM 5-3805-261-23-2
STEERING ARMS AND TIE ROD MAINTENANCE - CONTINUED
0301 00
REMOVAL
NOTE
This procedure covers replacement of the right steering arm. Follow these instructions for the left steering
arm.
1.
Remove nut (2), washer (3), bolt (5), and lock (6).
2.
Remove bolt (1), washer (9), and retainer (8).
CAUTION
Do not remove pin from wheel lean, lean arm, or lean bar.
3.
Remove pin (4) from leaning wheel rod assembly (7). Drive out pin with hammer and punch just far enough to clear rod
assembly.
4.
Turn battery disconnect switch to ON position and start engine (TM 5-3805-261-10).
5.
Operate wheel lean control lever to retract rod assembly (7) into cylinder (TM 5-3805-261-10).
1
9
8
7
6
5
4
397-2332
3
2
6.
Stop engine.
7.
Turn battery disconnect switch to OFF position (TM 5-3805-261-10).
0301 00-2
