TM 5-3805-261-23-2
TRANSMISSION CONTROL RELIEF VALVE MAINTENANCE - CONTINUED
0296 00
TESTING - CONTINUED
NOTE
5
The following test is for transmission oil
TO TRANSMISSION
cooler relief pressure.
SAMPLING VALVE
10.
Disconnect hose assembly (5) from valve assembly
(4).
11.
Remove elbow (8), adapter (7), and preformed pack-
ing (6). Discard preformed packing.
4
6
397-4135
8
7
12.
Use a 9/16-18 adapter to install 0 to 200 psi (10 to 1,379 kPa) pressure gauge.
13.
NOTE
Pressure gauge must read 75 psi (517 kPa). If not, replace control relief valve.
14.
Position transmission control lever in first speed for-
0 TO 200 PSI
ward and read pressure gauge.
PRESSURE GAUGE
15.
Stop engine.
16.
Remove 0 to 200 psi (0 to 1,379 kPa) pressure gauge
and 9/16-18 adapter.
397-4136
9/16 - 18
ADAPTER
17.
Install new preformed packing (6), adapter (7), and elbow (8) on valve assembly (4).
18.
Connect hose assembly (5).
0296 00-3