TM 5-3805-261-23-2
ENGINE-TO-TRANSMISSION ADAPTER REPLACEMENT - CONTINUED
0295 00
REMOVAL - CONTINUED
BOLTS
LINK BRACKETS
WARNING
Use extreme caution when handling heavy
5
parts. Provide adequate support and use
assistance during procedure. Ensure that
any lifting device used is in good condi-
tion and of suitable load capacity. Keep
clear of heavy parts supported only by lift-
ing device. Failure to follow this warning
may cause injury or death to personnel.
NOTE
Housing weighs 84 lb (38 kg).
3.
Install two link brackets and 3/8-16-2B bolts in holes
at top of housing (5).
397-4130
4.
Attach sling to housing (5) and take up slack.
5.
Remove 12 bolts (6) and lockwashers (7).
SLING
6.
Remove housing (5) from transmission (4) and lower
onto wood blocks.
7.
Remove sling.
7
6
5
4
397-4131
0295 00-2
