TM 5-3805-261-23-2
ENGINE-TO-TRANSMISSION ADAPTER REPLACEMENT - CONTINUED
0295 00
REMOVAL - CONTINUED
8.
Remove and discard preformed packing (12).
9.
Support coupling (9).
10.
Remove bolt (11), retainer (10), and coupling (9) from transmission (4) input shaft.
11.
Remove and discard preformed packing (8).
4
8
9
12
10
11
397-4132
CLEANING AND INSPECTION
Clean and inspection all parts in accordance with WP 0020 00.
INSTALLATION
1.
Position new preformed packing (8) on transmission (4) input shaft.
2.
Position coupling (9).
3.
Install retainer (10) and bolt (11). Tighten bolt to 85 lb-ft (115 Nm).
4.
Install new preformed packing (12) on groove of transmission (4).
5.
Use sling to install housing (5) on transmission (4).
6.
Install 12 new lockwashers (7) and bolts (6).
7.
Remove sling.
8.
Remove two 3/8-16-2B bolts and link brackets.
0295 00-3
