TM 5-3805-261-23-2
TRANSMISSION, ADAPTER, AND DIFFERENTIAL REPLACEMENT - CONTINUED
0294 00
INSTALLATION - CONTINUED
4.
Rotate oil pump shaft to align splines of transmission
adapter gear to engine flywheel.
5.
Install 10 washers (6) and nuts (5) over studs between
transmission (4) and drive axle assembly.
4
397-4124
6
5
6.
Install 12 washers (2) and bolts (1) between adapter
LIFTING DEVICE
and flywheel housing.
7.
Remove lifting device from lifting eyes (3) of trans-
3
mission (4).
2
1
4
397-4123
8.
Install parking brake actuator and valve (WP 0312 00).
9.
Install drive axles (WP 0307 00).
10.
Connect differential lock line to transmission relief valve (WP 0306 00).
11.
Install transmission oil pump (WP 0297 00).
12.
Install remote steer air valves (Type II machine) (WP 0315 00).
13.
Install transmission oil lines (WP 0155 00).
14.
Install transmission oil filter base (WP 0153 00).
15.
Install transmission control cables to transmission housing (WP 0152 00).
16.
Install radiator hoses (WP 0057 00).
17.
Install fuel tank (WP 0044 00).
0294 00-5