TM 5-3805-261-23-2
CYLINDER BLOCK HEAD ASSEMBLY MAINTENANCE - CONTINUED
0270 00
DISASSEMBLY
35
1.
Remove four bolts (35), washers (36), cover (37), and
33
23
32
36
34
gasket (38). Discard gasket.
37
NOTE
38
39
Plates can remain installed on cylinder
block head assembly to facilitate installa-
40
tion.
25
2.
Remove four screws (32), washers (40), and plates (23
and 25).
3.
Remove three plugs (39).
41
NOTE
40
397-1302
To remove plugs, drill hole through plug
32
and pry out.
4.
Remove and discard four plugs (33 and 34) and eight
plugs (41).
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0020 00.
ASSEMBLY
1.
Reduce temperature of eight new plugs (41) and four new plugs (33 and 34) and install using driver and hammer.
2.
Install three plugs (39).
3.
Install plates (23 and 25), four washers (40), and screws (32).
4.
Install new gasket (38), cover (37), four washers (36), and bolts (35).
0270 00-4
