TM 5-3805-261-23-2
ENGINE FRONT COVERS REPLACEMENT - CONTINUED
0269 00
REMOVAL - CONTINUED
NOTE
Mark all bolts to ensure that they are installed in their original positions during installation.
3.
Remove six nuts (12) and washers (13).
4.
Remove cover (11) and gasket (10). Discard gasket.
5.
Remove 21 bolts (9), nuts (6), and washers (5).
6.
Remove cover (8) and gasket (7). Discard gasket.
6
5
9
9
13
7
10
11
12
8
397-1281
9
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0020 00.
INSTALLATION
NOTE
Position new gasket on timing gear plate and cut gasket even with bottom face of cylinder block before
installing.
Gasket cement is applied to bottom of gasket where it contacts oil pan plate gasket.
1.
Apply gasket cement to bottom of new gasket (7) and install new gasket.
NOTE
Position timing gear cover on timing gear plate.
2.
Install timing gear cover (8).
3.
Install 21 bolts (9), washers (5), and nuts (6). Tighten nuts to 14 to 20 lb-ft (19 to 27 Nm).
0269 00-2