TM 5-3805-261-23-2
CYLINDER BLOCK HEAD ASSEMBLY MAINTENANCE - CONTINUED
0270 00
INSTALLATION - CONTINUED
5.
Install 14 washers (13) and bolts (14), and five screws
(15) loosely on cylinder head (11). Lubricate threads
on five screws with oil.
6.
Install rocker arm assembly (WP 0273 00).
7.
Tighten cylinder block head (11) bolts A through R in
letter sequence to 115 lb-ft (156 Nm).
8.
Tighten bolts A through R to 185 lb-ft (291 Nm).
397-1303
11
9.
Tighten bolts A through R again in letter sequence to
185 lb-ft (251 Nm).
10.
Tighten bolts S through W in letter sequence to 32 lb-ft (43 Nm).
11.
Adjust valves (WP 0274 00).
12.
Position new gaskets (16 and 21) and elbow (22) on
14
15
left-front of engine.
13
13.
Install two bolts (17) and bolts (18 and 19).
16
17
18
11
22
21
19
20
397-1300
0270 00-6