TM 5-3805-261-23-2
ENGINE MOUNTING AND TRUNNION REPLACEMENT - CONTINUED
0268 00
REMOVAL - CONTINUED
3.
Remove two bolts (8) and bracket (7) from bottom-
rear of engine.
12
4.
Remove dowel (9) from bracket (7).
7
5.
Remove two bolts (12) and bracket (11) from bottom-
rear of engine.
6.
Remove dowel (10) from bracket (11).
8
12
11 10
9
8
397-1276
7.
Remove six bolts (16), washers (17), and support (18) from bottom-front of engine.
CAUTION
Use care when removing and installing trunnion to prevent damage to crankshaft front seal.
8.
Remove three bolts (13), trunnion (15), and preformed
packing (14) as an assembly. Discard preformed pack-
ing.
13
18
14
17
15
397-1277
16
0268 00-2