TM 5-3805-261-23-1
OIL COOLER TO RELIEF VALVE AND HYDRAULIC
TANK LINES AND FITTINGS REPLACEMENT - CONTINUED
0250 00
REMOVAL - CONTINUED
23.
Remove two nuts (63), washers (64), clamp (65), plate (66), and clamp (67) from under hydraulic tank.
66 67
64 65
63
397-1653
NOTE
80
68 69
Type II machines are equipped with quick-
21
disconnect fittings on hose assemblies (35
and 39).
70
79
24.
Disconnect hose assemblies (35 and 39) from connec-
71
tors (74 and 77) at bottom of hydraulic pump relief
72
valve. Remove and discard preformed packings (75
and 76).
25.
Remove hose assemblies (35 and 39) from machine.
26.
Remove connectors (74 and 77) and preformed pack-
ings (73 and 78). Discard preformed packing.
78
73
77
27.
Disconnect hose assembly (21) from connector (71) at
74
76
top of hydraulic pump relief valve. Remove and dis-
75
35
card preformed packing (70).
39
28.
Remove hose assembly (21) from machine.
397-1654
29.
Remove connector (71) and preformed packing (72).
Discard preformed packing.
30.
Disconnect hose assembly (80) from elbow (69).
Remove and discard preformed packing (68).
31.
Remove elbow (69) and preformed packing (79). Dis-
card preformed packing.
0250 00-7