TM 5-3805-261-23-1
SIDESHIFT CYLINDER AND MOUNTING REPLACEMENT - CONTINUED
0247 00
INSTALLATION - CONTINUED
13.
Connect chain to rod (4) end of cylinder and bracket
(3).
14.
Start engine (TM 5-3805-261-10).
15.
Retract rod (4) end of cylinder and pull blade into
position.
16.
Stop engine.
17.
Remove chain from bracket (3) and rod (4).
4
CHAIN
3
397-1618
18.
Extend rod (4) to align with pin (1).
19.
Install pin (1) and new cotter pin (2).
2
1
4
397-1611
20.
Install guards (WP 0259 00).
21.
Start engine (TM 5-3805-261-10).
22.
Raise blade from ground (TM 5-3805-261-10).
23.
Operate control levers and cycle system through at least five full-travel movements to bleed air from system.
24.
Stop engine and check for leaks.
25.
Check hydraulic oil level and fill as necessary (WP 0216 00).
END OF WORK PACKAGE
0247 00-9
