TM 5-3805-261-23-1
SCARIFIER CYLINDER REPLACEMENT - CONTINUED
0248 00
REMOVAL
1.
Remove and discard tie strap (6) from scarifier cylinder (1) assembly.
CAUTION
Cap hose ends and plug open ports to prevent contamination.
NOTE
Tag hose assemblies before disconnecting to aid in installation.
2.
Disconnect hose assemblies (9) from elbow (7). Remove and discard preformed packing (8).
3.
Remove elbow (7) and preformed packing (10). Discard preformed packing.
4.
Disconnect hose assembly (5) from connector (3). Remove and discard preformed packing (4).
5.
Remove connector (3) and preformed packing (2). Discard preformed packing.
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death to per-
sonnel.
NOTE
Scarifier cylinder weighs 65 lb (29 kg).
6.
With assistance, attach sling to scarifier cylinder (1) assembly. Remove slack from sling.
1
2
10
5
3
7
4
8
9
6
397-1619
0248 00-2
