TM 5-3805-261-23-1
SIDESHIFT CYLINDER AND MOUNTING REPLACEMENT - CONTINUED
0247 00
INSTALLATION - CONTINUED
NOTE
New style bracket (24) does not have nut (17) and washers (15 and 16).
6.
Install bracket (24), nut (14), washers (15 and 16), nut (17), washer (22), nut (21), and new cotter pin (20). Tighten nut
(21) to zero clearance then back off nut one slot to install cotter pin. Tighten nut (14) to 1,200 lb-ft (1,627 Nm). Maintain
clearance of 1/8 in. (32 mm) or larger .
7.
Install washer (28 and 19), pin (18), bolt (23), washer (26), and nut (27).
8.
Remove sling from bracket (24).
13
SLING
14
15
16
17
18
19
20
21
28
27 26
FLOOR JACK
397-1615
25
23
22
24
OLD STYLE BRACKET SHOWN
0247 00-7
