TM 5-3805-261-23-1
CIRCLE DRIVE AND LEANING WHEEL CHECK VALVE MAINTENANCE - CONTINUED
0239 00
DISASSEMBLY
WARNING
Springs are under pressure. Loosen plugs carefully to relieve pressure of springs. Failure to follow this warn-
ing may cause injury to personnel.
NOTE
This procedure covers disassembly of the circle drive check valve. Follow these instructions for the leaning
wheel check valve.
1.
Remove two plugs (46) from check valve (9) assem-
bly.
46
2.
Remove and discard two preformed packings (47)
from plugs (46).
47
397-1575
3.
Remove two springs (48) and balls (49).
48
49
49
48
46
47
397-1576
0239 00-6
