TM 5-3805-261-23-1
CIRCLE DRIVE AND LEANING WHEEL CHECK VALVE MAINTENANCE - CONTINUED
0239 00
REMOVAL
NOTE
Perform steps 1 through 8 to remove circle drive check valve.
1.
Remove eight bolts (1), washers (2 and 3), and frame cover (4) from left side of machine.
CAUTION
Cap hose ends to prevent contamination.
NOTE
Tag hose assemblies before disconnecting to aid in installation.
2.
Disconnect hose assemblies (5 and 13) from connectors (7 and 11). Remove and discard preformed packings (6 and 12).
3.
Remove connector (7) and preformed packing (8) from circle drive check valve (9). Discard preformed packing.
4.
Remove connector (11) and preformed packing (10). Discard preformed packing.
4
3
2
1
56
7
8
13
12
11
10
9
397-675
0239 00-2
