TM 5-3805-261-23-1
CIRCLE DRIVE AND LEANING WHEEL CHECK VALVE MAINTENANCE - CONTINUED
0239 00
REMOVAL - CONTINUED
NOTE
Perform steps 10 through 17 to remove leaning wheel check valve.
10.
Remove eight bolts (24), washers (25 and 26), and frame cover (27) from right side of machine.
CAUTION
Cap all hose ends to prevent contamination.
NOTE
Tag hose assemblies before disconnecting to aid in installation.
11.
Disconnect hose assemblies (28 and 29) from elbows (34 and 31). Remove and discard preformed packings (35 and 30).
12.
Remove elbow (31) and preformed packing (32) from leaning wheel check valve (9).
13.
Remove elbow (34) and preformed packing (33). Discard preformed packing.
27
29
24 25 26
28
30
31
32
35
34
33
9
397-677
0239 00-4
