TM 5-3805-261-23-1
CIRCLE DRIVE AND LEANING WHEEL CHECK VALVE MAINTENANCE - CONTINUED
0239 00
INSTALLATION - CONTINUED
17.
Install new preformed packing (10) and connector (11) to circle drive check valve (9).
18.
Install new preformed packing (8) and connector (7).
19.
Install new preformed packings (12 and 6) and connect hose assemblies (13 and 5) to connectors (11 and 7).
20.
Start engine (TM 5-3805-261-10).
21.
Operate control levers and cycle system through at least five full-travel movements to bleed air from system.
22.
Stop engine and check for leaks.
23.
Check hydraulic oil level and fill as necessary (WP 0216 00).
24.
Install frame cover (4) to machine with eight washers (3 and 2) and bolts (1).
4
3
2
1
56
7
8
13
12
11
10
9
397-675
END OF WORK PACKAGE
0239 00-10
