TM 5-3805-261-23-1
HYDRAULIC CONTROL LEVERS REPLACEMENT - CONTINUED
0219 00
REMOVAL
1.
Remove bolt (8), washer (7), retainer (6), shim (5), and bearing (4).
NOTE
Control levers must be out of alignment to provide adequate clearance for removal of linkage bolts.
2.
Remove bolt (1) and lockwasher (2). Discard lockwasher.
3.
Disconnect linkage (3).
4.
Loosen nut (9).
5.
Remove blade lift knob (10) and nut (9).
3
2
1
10
9
8
7
6
54
397-704
0219 00-2
