TM 5-3805-261-23-1
HYDRAULIC CONTROL LEVERS REPLACEMENT - CONTINUED
0219 00
CLEANING AND INSPECTION
Clean and inspect in accordance with WP 0020 00.
INSTALLATION
1.
Install shaft (84), bearing (85), spacer (76), bearing (83), and lever (79).
2.
Install nut (78) and articulation knob (77).
NOTE
Control levers must be out of alignment to provide adequate clearance for installation of bolts.
3.
Connect linkage (80).
4.
Install new lockwasher (81) and bolt (82).
5.
Install bearings (75 and 74) and lever (70).
6.
Install nut (69) and centershift knob (68).
7.
Connect linkage (71).
8.
Install new lockwasher (72) and bolt (73).
9.
Install bearings (67 and 66) and lever (60).
58
10.
Install nut (59) and leaning wheel knob (58).
11.
Connect linkage (61).
59
12.
Install new lockwasher (62) and bolt (63).
60
13.
Install bearings (65 and 64).
61
62
63
67
66
65
64
397-710
0219 00-7
