TM 5-3805-261-23-1
REAR BUMPER REPLACEMENT (MODELS 130GSCE AND 130GNSCE) - CONTINUED
0205 00
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0020 00.
INSTALLATION
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death to per-
sonnel.
NOTE
Bumper weighs 100 lb (45 kg).
1.
With assistance, attach sling to bumper (6) and position on rear frame.
2.
Install two brackets (7), four washers (8), bolts (9).
3.
Install six washers (11) and bolts (10).
4.
Remove sling.
2
5.
Install pin (2) and pin (1).
6.
Install bolt (4) and nut (3).
3
1
4
397-4382R
7.
Install backup alarm (WP 0121 00).
END OF WORK PACKAGE
0205 00-3
