TM 5-3805-261-23-1
REAR BUMPER REPLACEMENT (CCE MACHINE) - CONTINUED
0204 00
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0020 00.
INSTALLATION
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death to per-
sonnel.
NOTE
Bumper weighs 100 lb (45 kg).
1.
With assistance, attach sling to bumper (4) and position on rear frame.
2.
Install four washers (6) and bolts (5).
3.
Install four washers (8) and bolts (7).
4.
Remove sling.
5.
Install pin (2), pin (1), and new cotter pin (3).
2
1
3
397-631
6.
END OF WORK PACKAGE
0204 00-3