TM 5-3805-261-23-1
FRONT WIPER (LOWER) MAINTENANCE (CCE MACHINE) - CONTINUED
0206 00
REMOVAL - CONTINUED
3.
Remove two locknuts (18), screws (19), blades (21), and clips (20) from arm assembly (17). Discard locknuts.
4.
Remove two drivers (15), caps (14), nuts (13), washers (12), and gaskets (11) from shaft of linkage (1). Discard gaskets.
5.
Remove four screws (16), cover (5), and gasket (6). Discard gasket.
NOTE
Turn wiper switch on. Turn disconnect switch ON and OFF as needed to expose three motor mounting bolts
and linkage mounting nut.
6.
Remove three bolts (10) and lockwashers (9). Discard lockwashers.
7.
Remove nut (8) and lockwasher (7). Discard lockwasher.
21
20
18
19
7
17
10
1
8
9
12
11
13
15 14
6
5
16
397-636
0206 00-3