TM 5-3805-261-23-1
REAR WHEELS REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
Personnel Required
Maintenance Level
Unit
Two
Tools and Special Tools
References
Tool kit, general mechanic's (Item 89, WP 0348 00)
Shop equipment, common no. 1 (Item 75, WP 0348
Equipment Conditions
Jack, hydraulic (Item 37, WP 0348 00)
Machine parked on level ground (TM 5-3805-261-
10)
Jack stand (Item 84, WP 0348 00)
Parking/emergency brake applied (TM 5-3805-261-
Sling (Item 78, WP 0348 00)
10)
Wrench, torque (Item 102, WP 0348 00)
Implements lowered to ground (TM 5-3805-261-
Lifting device, 500-lb capacity
10)
Wood blocks
Engine off (TM 5-3805-261-10)
Materials/Parts
Battery disconnect switch in OFF position (TM 5-
3805-261-10)
Rag, wiping (Item 35, WP 0349 00)
REMOVAL
WARNING
Be sure the parking brake is set before beginning this task. In addition, block the wheel opposite the one
being removed. Failure to do so may cause the machine to slip off the jack stand causing injury or death to
personnel.
NOTE
This procedure covers replacement of the right rear wheel. Follow these instructions for the left rear
wheel.
Some machines have 10 bolts instead of 10 nuts.
