TM 5-3805-261-23-1
REAR WHEELS REPLACEMENT - CONTINUED
0167 00
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0020 00.
INSTALLATION
1.
Install sling on rear wheel (3).
2.
Position rear wheel (3) on machine.
3.
Install 10 washers (2) and nuts (1).
4.
Use hydraulic jack to lift machine and remove jack stand.
5.
Lower rear wheel (3) to ground and remove hydraulic jack.
6.
Tighten 10 bolts (1) evenly to 420 to 480 lb-ft (569 to 651 Nm). Tighten 10 nuts to 340 to 390 lb-ft (461 to 529 Nm).
7.
Remove sling.
8.
Check pressure of tire (TM 5-3805-261-10).
END OF WORK PACKAGE
0167 00-3