TM 5-3805-261-23-1
AIR COMPRESSOR GOVERNOR REPLACEMENT - CONTINUED
0165 00
REMOVAL - CONTINUED
1.
Remove air line (3) from elbow (2) on air compressor governor (5).
2.
Loosen air line (3) at elbow (1) and move aside.
3.
Remove elbows (1 and 2) from air compressor governor (5).
CAUTION
Cap hose ends and plug open ports to prevent contamination.
NOTE
Do not remove bottom two bolts in mounting bracket.
Tag hose and tube assemblies before disconnecting to aid in installation.
4.
Remove two bolts (10), washers (11 and 9), two spacers (13), and nuts (4) from bracket (12) and air compressor gover-
nor (5).
5.
Disconnect air tank line (8) from connector (7).
6.
Remove connector (7) and elbow (6).
7.
Remove air compressor governor (5).
3
4
1
2
6
7
5
8
9
10
11
12
13
397-2329
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0020 00.
0165 00-2
