TM 5-3805-261-23-1
REAR WORK LIGHT LEAD REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
Maintenance Level
References
Unit
Equipment Conditions
Tools and Special Tools
Machine parked on level ground (TM 5-3805-261-
10)
Materials/Parts
Parking/emergency brake applied (TM 5-3805-261-
10)
Implements lowered to ground (TM 5-3805-261-
10)
Engine off (TM 5-3805-261-10)
Cable tie
Lockwasher (2)
REMOVAL
NOTE
Tag rear work light lead before disconnecting to aid in installation.
1.
Remove screw (2) and two lockwashers (1) and disconnect rear work light lead (6) from rear work light (7). Discard
2.
Remove and discard tie strap (4) from left-rear of engine compartment near radiator.
3.
Disconnect lead (6) connector (3) from main wiring harness connector (5).
2
7
6
1
3
4
5
397-414