TM 5-3805-261-23-1
REAR WORK LIGHT LEAD REPLACEMENT - CONTINUED
0137 00
REMOVAL - CONTINUED
NOTE
Snake lead down through grommet.
4.
Remove four bolts (10), washers (9), and lead (6) from
8
11
6
machine.
8
5.
Remove four clamps (8) from lead (6).
9
6.
Remove grommet (11).
10
8
397-415
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0021 00.
INSTALLATION
2
1.
Install grommet (11).
7
2.
Install four clamps (8) on lead (6).
6
1
3.
Snake lead (6) up through grommet (11), position lead
on machine and install four washers (9) and bolts (10)
on clamps (8).
3
4.
Connect lead (6) to main wiring harness connector (5).
4
5.
Install new tie strap (3) on left-rear of engine compart-
ment near radiator.
6.
Install lead (6), two new lockwashers (1), and bolts (2)
on rear work light (7).
Close left side screen door (WP 0051 00).
7.
8.
Connect battery cables (WP 0125 00).
5
397-2140
END OF WORK PACKAGE
0137 00-2
