TM 5-3805-261-23-1
FRONT WORK LIGHTS LEAD REPLACEMENT - CONTINUED
0136 00
REMOVAL
1.
Loosen bolt (15) on bottom of right work light (16) and move forward for access to screw (2).
NOTE
Tag front work lights lead and main wiring harness before disconnecting to aid in installation.
2.
Remove screw (2) and lockwasher (1) and disconnect front work lights lead (3) from right work light (16). Discard lock-
washer.
3.
Remove bolt (14) from clip (13).
4.
Loosen bolt (12) on bottom of left work light (4) and move forward for access to screw (7).
5.
Remove screw (7) and lockwasher (6) and disconnect lead (3) from left work light (4). Discard lockwasher.
6.
Remove bolt (5) from clip (8).
7.
Detach clip (11) from lead (3) at connector (9) and main wiring harness connector (10) under left side of cab.
8.
Disconnect lead (3) at connector (9) from connector (10).
9.
Remove lead (3) from machine.
10.
Remove clips (8 and 13) from lead (3).
4
5
7
6
3
2
1
8
9
10
16
15
13
14
11
12
397-413
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0021 00.
0136 00-2