TM 5-3805-261-23-1
SUPPLEMENTAL STEERING DUMP VALVE WIRING HARNESS REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
References
Maintenance Level
Unit
Equipment Conditions
Tools and Special Tools
Machine parked on level ground (TM 5-3805-261-
10)
Tool kit, general mechanic's (Item 89, WP 0348 00)
Parking/emergency brake applied (TM 5-3805-261-
Materials/Parts
10)
Implements lowered to ground (TM 5-3805-261-
Rag, wiping (Item 35, WP 0349 00)
10)
Tag, marker (Item 44, WP 0349 00)
Engine off (TM 5-3805-261-10)
Battery cables disconnected (WP 0125 00)
Lockwasher (2)
REMOVAL
1.
Detach supplemental steering dump valve wiring harness (4) and main wiring harness (5) from clip (3).
NOTE
Tag wiring harnesses before disconnecting to aid in installation.
2.
Disconnect dump valve wiring harness (4) from main wiring harness (5).
3.
Remove clip (3).
4.
Remove two screws (1), lockwashers (6), and dump valve wiring harness (4) from dump valve switch (2). Discard lock-
washers.
1
6
2
5
4
3
397-408
