TM 5-3805-261-23-1
STARTING MOTOR LEAD REPLACEMENT - CONTINUED
0128 00
REMOVAL
NOTE
Tag starting motor lead before disconnecting to aid in installation.
1.
Remove bolt (3), disconnect starting motor lead (4) and remove lockwasher (2) from fuel injection mounting support (1)
on right engine block. Discard lockwasher.
2.
Remove nut (5), lockwasher (6), and lead (4) from starting motor (7). Discard lockwasher.
1
2
3
65
7
4
397-405
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0021 00.
INSTALLATION
1.
Connect lead (4) and install new lockwasher (6) and nut (5) on starting motor (7). Tighten nut to 22 lb-ft (30 Nm).
2.
Install new lockwasher (2), starting motor lead (4), and bolt (3) on support (1) on right engine block.
3.
Install right side engine panel (WP 0182 00).
4.
Connect battery cables (WP 0125 00).
END OF WORK PACKAGE
0128 00-2
